The Hydrogen Smart Container, short HSC, is a hydrogen fuelling station, packed into a 20 foot container. The HSCs can be setup as either 35MPa (350bar) or 70MPa (700bar) H2 fuelling station. Setup and commissioning is straightforward and operability can be achieved very quickly.

Uptime and Mobility

Packed into a Container, the hydrogen fuelling station is more durable and mobile – enabling fuelling in harsh conditions. Mountain or valley, delivered by helicopter or truck, there are no places the HSC cannot go.



Smart and Compact

The Hydrogen Smart Container is designed as a compact and portable refuelling system. This self-contained system can be brought to different locations with ease. On site, the container must be connected to the existing supply infrastructure and after installation and approval by the respective authorities, the H2 refuelling system is ready for use.

The tight packaging of the HSC enables placement of a dispensing unit, mid-pressure H2-buffer, compressors, instrument air and electrical cabinet – all within a 20 foot container.

To ensure optimal safety, the container is split into two zones: the Ex-Zone and the NonEx-Zone. Instrument air, air pressure storage and electrical cabiet are located inside the NonEx-Zone while all the components required for the processing of hydrogen – from supply point to fuelling nozzle – are located inside the larger Ex-Zone. The dispensing unit is integrated into the outer wall of the container and easily covered to protect the dispenser during transportation.

Components

  1. Hydrogen compressor
  2. Refuelling-rack
  3. Dispensing unit
  4. Compressed air reservoir
  5. Electrical cabinet
  6. Pneumatic compressor
  7. H2-buffer
  8. Supply-rack
  9. Additional supply-rack
  10. H2-supply

H2-Compressor

The H2 Compressor station contains two small hydrogen compressors that empty the supply storage and fill the integrated H2-buffers to the appropriate pressure levels.

This setup also enables “Live Fuelling” – compressing hydrogen directly into the vehicle storage tanks to achieve higher fill levels and more back-to-back fuellings.

Instrument Air System

Most components are electrically addressed but pneumatically controlled. To facilitate this the HSC comes with an integrasted IAS which is comprised of a pneumatic compressor and an air pressure tank – all of which is located inside the NonEx part of the container.

H2-Buffer

In order to reach high fuelling levels while fuelling a lot of vehicles back-to-back the HSC comes equipped with a medium pressured H2 buffer. This 50MPa (500bar) H2 buffer stores over 1000 liters of hydrogen at 45MPa (450bar).

Dispenser

The Integrated Dispenser can be fitted with either 35MPa (350bar) or 70MPa (700bar) equipment to fuel both 35MPa and 70Mpa vehicles. The insides of the Hydrogen Smart Container are always designed to handle 70MPa fuelling – in order to switch pressure levels, all one has to do is swap out the over pressure valve and nozzle, as these can not be used for both 35MPa and 70MPa.

Software

Our software allows highest levels of flexibility and adaptability to satisfy all fuelling requirements our customers have. Usage of Siemens Failsafe-PLCs and our know how enables us to offer you state of the art fuelling protocols based on the newest standards – SAE J2601 for vehicles under 10kg storage, cooled |JPEC for vehicles over 10kg storaged, cooled.

Sometimes our customers require cutting-edge fuelling protocols – for scenarios that are not covered by current standards – and we’re happy to oblige. We plan and develop safe and fast fuelling protocols together with vehicle manufacturers in order to satisfy your needs.

H2-Plant operators all over the world trust us with engineering, development and commissioning of H2 fuelling stations. Our long standing expertise in software and electronical engineering helps us help you reach your goals when it comes to top of the line H2 fuelling plants.

Let’s create something – together.


HSC Datasheet

35MPa (350bar)70MPa (700bar)
Connection:
Hydrogen qualityQuality 5.0Quality 5.0
Max. supply pressure30MPa (300bar)30MPa (300bar)
Power supply400V, 50Hz, 45A400V, 50Hz, 45A
Dimensions:
Container20 feet20 feet
Instrument Air:
Pneumatic driven compressor0,55MPa (5,5bar) to 1MPa (1bar) air pressure0,55MPa (5,5bar) to 1MPa (1bar) air pressure
Oil-Water seperatorIntegratedIntegrated
Hydrogen compressor:
Output2,55kg/h@25MPa (250bar)2,55kg/h@25MPa (250bar)
Min. inlet pressure7MPa (70bar)7MPa (70bar)
Buffer storage:
Capacity1050 liters H2 @ 45MPa (450bar)1050 liters H2 @ 45MPa (450bar)
Temperature range-40°C to +65°C-40°C to +65°C
Dispenser unit:
DispenserHydrogen Smart FuellerHydrogen Smart Fueller
Fuelling equipmentWEH TK17 35MPaWEH TK17 70MPa with IR
Pressure protection42,5MPa (425bar)87,5MPa (875bar)
Gas detectionIntegratedIntegrated
Operating display7″ Touch HMI7″ Touch HMI
RFID-LoginOptionalOptional
Remote maintenanceOptionalOptional
Ambient temperature range-20°C to +40°C-20°C to +40°C
Datasheet:DownloadDownload

Media